#===========================================================================
# *** HP/MP/ATB/LimitBreak bar Slanted Style Compatible with RTAB ***
# *** Version 2.1
#---------------------------------------------------------------------------
# by Clive
# based on Cogwheel's Bars and Sephiroth Spawn's Slanted Bars.
#---------------------------------------------------------------------------
# ----- GREAT THANKS to DerVVulfman for solving the lag problem
#------This is a plug and play script so it should work without any problem!
#=============================================================================
# If using with Limit Break, must paste BELOW the Limit Break script as it re-
# writes the 'Gauge drawing' system. Will cause an error if not properly put.
# If used with Trickster's STEAL SCRIPT version 6 R1 (revision 1), then the
# height of RTAB's AT Bar (Draw Actor ATG) may not be smaller than 5 pixels
# due to a float-to-float error. A height of 6 pixels is the smallest.
#==============================================================================
# ** Game_Actor
#------------------------------------------------------------------------------
# This class handles the actor. It's used within the Game_Actors class
# ($game_actors) and refers to the Game_Party class ($game_party).
#==============================================================================
class Game_Actor < Game_Battler
#--------------------------------------------------------------------------
# * Get the current EXP
#--------------------------------------------------------------------------
def now_exp
return @exp - @exp_list[@level]
end
#--------------------------------------------------------------------------
# * Get the next level's EXP
#--------------------------------------------------------------------------
def next_exp
return @exp_list[@level+1] > 0 ? @exp_list[@level+1] - @exp_list[@level] : 0
end
end
#==============================================================================
# ** Window_Base
#------------------------------------------------------------------------------
# This class is for all in-game windows.
#==============================================================================
class Window_Base < Window
#==========================================================================
# * Draw Slant Bar(by SephirothSpawn)
#==========================================================================
def draw_slant_bar(x, y, min, max, width = 152, height = 6,
bar_color = Color.new(150, 0, 0, 255),
end_color = Color.new(255, 255, 60, 255))
# Draw Border
for i in 0..height
self.contents.fill_rect(x + i, y + height - i, width + 1, 1, Color.new(50, 50, 50, 255))
end
# Draw Background
for i in 1..(height - 1)
r = 100 * (height - i) / height + 0 * i / height
g = 100 * (height - i) / height + 0 * i / height
b = 100 * (height - i) / height + 0 * i / height
a = 255 * (height - i) / height + 255 * i / height
self.contents.fill_rect(x + i, y + height - i, width, 1, Color.new(r, b, g, a))
end
# Draws Bar
for i in 1..( (min.to_f / max.to_f) * width - 1)
for j in 1..(height - 1)
r = bar_color.red * (width - i) / width + end_color.red * i / width
g = bar_color.green * (width - i) / width + end_color.green * i / width
b = bar_color.blue * (width - i) / width + end_color.blue * i / width
a = bar_color.alpha * (width - i) / width + end_color.alpha * i / width
self.contents.fill_rect(x + i + j, y + height - j, 1, 1, Color.new(r, g, b, a))
end
end
end
#==========================================================================
# * Draw HP
# actor : actor
# x : draw spot x-coordinate
# y : draw spot y-coordinate
# width : draw spot width
#==========================================================================
alias :draw_actor_hp_hpsp :draw_actor_hp
def draw_actor_hp(actor, x, y, width = 144)
draw_slant_bar(x, y + 12, actor.hp, actor.maxhp, width, 6,
bar_color = Color.new(150, 0, 0, 255),
end_color = Color.new(255, 255, 60, 255))
draw_actor_hp_hpsp(actor, x, y, width)
end
#==========================================================================
# * Draw SP
# actor : actor
# x : draw spot x-coordinate
# y : draw spot y-coordinate
# width : draw spot width
#==========================================================================
alias :draw_actor_sp_hpsp :draw_actor_sp
def draw_actor_sp(actor, x, y, width = 144)
draw_slant_bar(x, y + 12, actor.sp, actor.maxsp, width, 6,
bar_color = Color.new(0, 0, 155, 255),
end_color = Color.new(255, 255, 255, 255))
draw_actor_sp_hpsp(actor, x, y, width)
end
#==========================================================================
# * Draw EXP
# actor : actor
# x : draw spot x-coordinate
# y : draw spot y-coordinate
#==========================================================================
alias raz_bars_base_exp draw_actor_exp
def draw_actor_exp(actor, x, y)
if actor.level == 99
draw_slant_bar(x, y + 18, 1, 1, 190, 6, bar_color = Color.new(0, 100, 0, 255), end_color = Color.new(0, 255, 0, 255))
else
draw_slant_bar(x, y + 18, actor.now_exp, actor.next_exp, 190, 6, bar_color = Color.new(0, 100, 0, 255), end_color = Color.new(255, 255, 255, 255))
end
raz_bars_base_exp(actor, x, y)
end
#==========================================================================
# * Draw Parameter
# actor : actor
# x : draw spot x-coordinate
# y : draw spot y-coordinate
# type : parameter type (0-6)
#==========================================================================
alias raz_bars_base_parameter draw_actor_parameter
def draw_actor_parameter(actor, x, y, type)
case type
when 0
para_color1 = Color.new(100,0,0)
para_color2 = Color.new(255,0,0)
para_begin = actor.atk
when 1
para_color1 = Color.new(100,100,0)
para_color2 = Color.new(255,255,0)
para_begin = actor.pdef
when 2
para_color1 = Color.new(100,0,100)
para_color2 = Color.new(255,0,255)
para_begin = actor.mdef
when 3
para_color1 = Color.new(50,0,100)
para_color2 = Color.new(50,0,255)
para_begin = actor.str
when 4
para_color1 = Color.new(0,100,0)
para_color2 = Color.new(0,255,0)
para_begin = actor.dex
when 5
para_color1 = Color.new(50,0,50)
para_color2 = Color.new(255,0,255)
para_begin = actor.agi
when 6
para_color1 = Color.new(0,100,100)
para_color2 = Color.new(0,255,255)
para_begin = actor.int
end
draw_slant_bar(x, y + 18, para_begin, 999, 155, 4, bar_color = para_color1,
end_color = para_color2)
raz_bars_base_parameter(actor, x, y, type)
end
#=========================================================================
# * Draw Actor ATG
# actor : Actor
# x : draw spot x-coordinate
# y : draw spot y-coordinate
# width : draw spot width
#=========================================================================
def draw_actor_atg(actor, x, y, width = 144, height = 6)
if @at_gauge == nil
# plus_x: revised x-coordinate
# rate_x: revised X-coordinate as (%)
# plus_y: revised y-coordinate
# plus_width: revised width
# rate_width: revised width as (%)
# height: Vertical width
# align1: Type 1 ( 0: left justify 1: center justify 2: right justify )
# align2: Type 2 ( 0: Upper stuffing 1: Central arranging 2:Lower stuffing )
# align3: Gauge type 0:Left justify 1: Right justify
@plus_x = 0
@rate_x = 0
@plus_y = 16
@plus_width = 0
@rate_width = 100
@width = @plus_width + width * @rate_width / 100
@height = 6
@align1 = 0
@align2 = 1
@align3 = 0
# Gradation settings: grade1: Empty gauge grade2:Actual gauge
# (0:On side gradation 1:Vertically gradation 2: Slantedly gradation?
grade1 = 1
grade2 = 0
# Color setting. color1: Outermost framework, color2: Medium framework
# color3: Empty framework dark color, color4: Empty framework light/write color
color1 = Color.new(0, 0, 0)
color2 = Color.new(255, 255, 192)
color3 = Color.new(0, 0, 0, 192)
color4 = Color.new(0, 0, 64, 192)
# Color setting of gauge
# Usually color setting of the time
color5 = Color.new(0, 64, 80)
color6 = Color.new(255, 255, 255)#(0, 128, 160)
# When gauge is MAX, color setting
color7 = Color.new(80, 0, 0)
color8 = Color.new(255, 255,255) #(240,0,0)
# Color setting at time of cooperation skill use
color9 = Color.new(80, 64, 32)
color10 = Color.new(255, 255, 255) #(240, 192, 96)
# Color setting at time of skill permanent residence
color11 = Color.new(80, 0, 64)
color12 = Color.new(255,255, 255) #(240, 0, 192)
# Drawing of gauge
gauge_rect_at(@width, @height, @align3, color1, color2, color3, color4,
color5, color6, color7, color8, color9, color10, color11, color12,
grade1, grade2)
end
# Variable at substituting the width of the gauge which is drawn
if actor.rtp == 0
at = (width + @plus_width) * actor.atp * @rate_width / 10000
else
at = (width + @plus_width) * actor.rt * @rate_width / actor.rtp / 100
end
# AT Width Check
if at > width
at = width
end
# Revision such as the left stuffing central posture of gauge
case @align1
when 1
x += (@rect_width - width) / 2
when 2
x += @rect_width - width
end
case @align2
when 1
y -= @height / 2
when 2
y -= @height
end
# Draw Border
for i in 0..height
self.contents.fill_rect(x + 1.5 + i, y + 12 + height - i, width - 2 , 3,
Color.new(50, 50, 50, 255))
end
# Draw Background
for i in 1..(height - 1)
r = 100 * (height - i) / height + 0 * i / height
g = 100 * (height - i) / height + 0 * i / height
b = 100 * (height - i) / height + 0 * i / height
a = 255 * (height - i) / height + 255 * i / height
self.contents.fill_rect(x + 1.5 + i, y + 12 + height - i, width - 3, 3,
Color.new(r, b, g, a))
end
# Rect_X control
if @align3 == 0
rect_x = 0
else
x += @width - at - 1
rect_x = @width - at - 1
end
# Color setting of gauge
if at == width
#Gauge drawing at the time of MAX
for i in 0..height
self.contents.blt(x + i + @plus_x + @width * @rate_x / 100, y -i +
@plus_y, @at_gauge, Rect.new(rect_x, @height * 2, at, @height))
end
else
if actor.rtp == 0
for i in 0..height
# Usually gauge drawing of the time
self.contents.blt(x + i + @plus_x + @width * @rate_x / 100, y- i +
@plus_y, @at_gauge,Rect.new(rect_x, @height, at, @height))
end
else
if actor.spell == true
for i in 0..height
#Gauge drawing at time of cooperation skill use
self.contents.blt(x + i + @plus_x + @width * @rate_x / 100, y - i +
@plus_y, @at_gauge, Rect.new(rect_x, @height * 3, at, @height))
end
else
for i in 0..height
# Gauge drawing at time of skill permanent residence
self.contents.blt(x + i + @plus_x + @width * @rate_x / 100, y - i +
@plus_y, @at_gauge, Rect.new(rect_x, @height * 4, at, @height))
end
end
end
end
end
end
Discord
Light Style