OK, this is going to be my first tutorial on here. I will attempt to teach people how to make a ship using the RTP tileset. I've seen Nouman's tutorial and the comments, so I figured I'd give it a shot.
OK, here we go.
Step One:Start out making a new map, I made mine 40x50. Fill the
1st layer with the water tile.
Step Two:Next you'll want to make the front of the boat. Switch to the
2nd layer for this.
(note you will have fool around with the tiles, its not a drag and drop, you have to make it a little wider)
You'll also want to try to remove the shadows on the right side of the boat. you can do that using this tile.
Step Three:Then you'll want to put the sides and rear of your boat on. I'm sure you've all noticed how the rear doesn't line up with the rest of the boat. So my fix to this is this.
Now, you'll notice I switched to the
3rd layer for that one railing.
So far our ship should look something like this.
Step Four:Switch back to the
first layer and fill in the boat floor.
Step Five:Now we'll start to add some sails. I also want some layers on my ship, just to change it up a bit. To do this switch to the
2nd layer.
Step Six:Now we need a place for the captain to steer the ship. Let's add a little place for that. Do this using the
2nd layer for the area, and the
3rd layer for the wheel and stairs.
Step Seven:Now using the
3rd layer add items around the ship. We're gonna need some lights, cannons, barrels, jars, maybe a life preserve or two, and some life boats if you wish. Feel free to play around with the rest of the tiles as well.
Step Eight:Now add some people, and other events around the ship. Here's the finished ship.
Now I'll show you each layer.
Layer OneLayer TwoLayer ThreeAny questions/comments post here. I'm hoping to do more tutorials, so any and all feedback is appreciated.