i'm having trouble with my switches in 2k. i'm trying to set up a switch that runs then resets itself. the problem is when i set the graphic as a switch facing one way on first page then another way on page 2 so it looks like the char threw the switch. i want i to reset when i leave and come back right now it don't,
<>Play SE OPen2
<>Change 1Chip:UpperChip 020 n,001Subsitu
<>Change 1Chip:UpperChip 026 n,001Subsitu
<>Change 1Chip:UpperChip 032 n,001Subsitu
<>Change 1Chip:UpperChip 021 n,019Subsitu
<>Change 1Chip:UpperChip 027 n,025Subsitu
<>Change 1Chip:UpperChip 032 n,031Subsitu
<>Change Switch :[0022:dungengatecastle1]-ON Set
<>
page 2 the switch is checked
and graphic shows switch oppisit direction
how do i get it so i can throw the switch again we he comes back in the room cause at the moment the gate resets but not the switch so i cant get back in
thats equal to all the rpg makers. Try this
Event
1st page of the event you put this:
Show choices: Do you want to pull the switch?
If Yes
play sound:switch change
switch operation switch ON
If No
Nothing
On the second page you do this:
Condition: If switch operation is ON
then you do this:
Show choices: Do you want to pull the switch off?
If Yes
play sound:switch change
switch operation switch OFF
If No
Nothing
NOTE: In the first page of the event, just place the image that the switch is up
In the second page oif the event put the image of the switch down
That will work. hope you get it !!!
Just so I know what you're asking.
You want a "switch" that opens a gate, then resets when you exit the map?
I think I can see your problem
When you flip the "switch" instead of a switch and second page you just change the graphic of the "switch" to look like it's been switched without the page change
Now being a 2k3 user I don't know the 2k command for that, in 2k3 it's change graphic under move event.
If you use what Darkgamer posted you'll have the same problem except you can turn the switch off and on again to open the gate, however if the gate was made of events tiled together that used the two page method of changing it's graphic and allowing possibility. The switch won't reset but nor would the gate, if you wanted it to reset, all you gotta do is add a turn switch off command in the teleport events, just after it hides the screen. Which you're better off doing.